Publikationen

Combining Locked Rotor and Steady State Tests for EESM Flux Linkage Identification
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2024. 2024 IEEE 9th Southern Power Electronics Conference (SPEC), Brisbane, 2nd-5th December 2024, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC62217.2024.10893237

Investigation of the Parameterization Influence in High-Frequency Models for Traction Motors with Hairpin Windings
Scheuermann, S.; Brodatzki, M.; Doppelbauer, M.
2024. IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society, Chicago, 3rd-6th November 2024, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON55916.2024.10905853

Sensitivity Analysis in High-Frequency Modeling of Traction Motors with Hairpin Windings
Scheuermann, S.; Brodatzki, M.; Doppelbauer, M.
2024. IEEE 9th Southern Power Electronics Conference (SPEC 2024), 7 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC62217.2024.10892864

2D Repetitive PI Control for Enhanced Harmonic Current Suppression in Induction Machines
Stoß, J.; Mader, P.; Goehner, S.; Geier, L.; Brodatzki, M.; Hiller, M.; Liske, A.
2024. 2024 IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, 20th-24th October 2024, 5918–5924a, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE55643.2024.10860776

Holistic Efficiency Map Calculation of Variable Flux Machines Regarding Relative Magnetisation
Kesten, J.; Müller, P.; Brodatzki, M.; Doppelbauer, M.
2024. 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 1023–1029, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEEDAM61530.2024.10609194

Investigation of Electrostatic Shieldings in Traction Motors to Mitigate Capacitive Bearing Currents
Scheuermann, S.; Brodatzki, M.; Doppelbauer, M.
2024. 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Napoli, Italy, 19-21 June 2024, 1087–1092, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEEDAM61530.2024.10609042

Influence Analysis on the Bearings’ Impedance Behavior of Inverter-Fed Motor Drives
Scheuermann, S.; Hagemann, B.; Brodatzki, M.; Doppelbauer, M.
2023. Elektromechanische Antriebssysteme 2023 : Tagungsband der 9. Fachtagung (VDE OVE) 8. und 9. November 2023 in Wien. Hrsg.: A. Binder; M. Doppelbauer, 99–105, VDE Verlag

Identification of Rotor Position and Current Dependent Flux Linkage Maps for EESMs
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, 17th - 20th May 2024, 1996–2003, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567840

“True-MTPL” – A New Optimization Method for Minimum Loss Operation of PMSM Drives
Goehner, S.; Brodatzki, M.; Liske, A.; Hiller, M.; Kolb, J.
2023. Elektromechanische Antriebssysteme 2023. Hrsg.: A. Binder, 88–94, VDE Verlag

Local Heat Transfer Coefficient Measurements on Shaft Spray Cooled End Windings
Hoffmann, F.; Bender, J.; Parche, M.; Brodatzki, M.; Dietrich, B.; Wetzel, T.; Doppelbauer, M.
2024. IEEE Transactions on Industry Applications, 60 (4), 5931–5940. doi:10.1109/TIA.2024.3379301

New Current Control Strategy for EESMs Based on the Magnetic Equivalent Circuit with Dynamic Decoupling of the d- and e-Axis
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2023. 2023 IEEE 8th Southern Power Electronics Conference (SPEC), 8 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC56436.2023.10408003

A New Resistive Adaptive Gate-Driving Concept with Automated Identification of Operational Parameters
Swoboda, P.; Kolb, J.; Brodatzki, M.; Humbert, A.; Hiller, M.
2023. PCIM Europe : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 8 S., VDE Verlag. doi:10.30420/566091150

SmartLoad - Neue Methoden zur Zuverlässigkeitssteigerung von hochautomatisierten elektrischen Fahrzeugen : Verfahren zur Fehlertoleranz und Redundanzmanagment auf Aktor- und Systemebene : Schlussbericht : Projektlaufzeit: Oktober 2018 bis Oktober 2021
Kolb, J.; Kautzmann, P.; Asmussen, S.-E.; Axtmann, M.; Brodatzki, M.; Haake, D.; Seiffer, A.; Zeifang, B.
2022. Schaeffler AG. doi:10.2314/KXP:1845896122

Ein referenzmodellbasiertes Verfahren zur Ermittlung von Rotorposition und Drehzahl einer permanentmagneterregten Synchronmaschine. Dissertation
Brodatzki, M. M.
2023, März 22. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000155262

Comparison of Losses in Small Star-and Delta-Connected Permanent Magnet Synchronous Machines
Decker, S.; Rollbuhler, C.; Brodatzki, M.; Rehm, F.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)

Design guideline for PCB integrated, high bandwidth, current slope sensing based on a planar Rogowski coil
Stoß, J.; Wurster, C.; Menger, N.; Brodatzki, M.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)

DQ0-modelling and parametrization approaches for small delta connected permanent magnet synchronous machines
Decker, S.; Rollbühler, C.; Rehm, F.; Brodatzki, M.; Oerder, A.; Liske, A.; Kolb, J.; Braun, M.
2021. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), 608–614, Institution of Engineering and Technology (IET). doi:10.1049/icp.2021.1082

DQ0 Modelling and Parameterization of small Delta connected PM Synchronous Machines
Decker, S.; Foitzik, S.; Rehm, F.; Brodatzki, M.; Rollbuhler, C.; Kolb, J.; Braun, M.
2020. 2020 International Conference on Electrical Machines (ICEM), 144–150, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM49940.2020.9270801

Predictive Trajectory Control with Online MTPA Calculation and Minimization of the Inner Torque Ripple for Permanent-Magnet Synchronous Machines
Decker, S.; Brodatzki, M.; Bachowsky, B.; Schmitz-Rode, B.; Liske, A.; Braun, M.; Hiller, M.
2020. Energies, 13 (20), Article: 5327. doi:10.3390/en13205327

Online Parameter Identification of Permanent Magnet Synchronous Machines with Nonlinear Magnetics based on the Inverter Induced Current Slopes and the dq-System Equations
Decker, S.; Stoss, J.; Liske, A.; Brodatzki, M.; Kolb, J.; Braun, M.
2019. Proceedings 2019 European Conference on Power Electronics and Applications (EPE’19 ECCE Europe), Genova, Italy, 2019, P.1-P.10. doi:10.23919/EPE.2019.8915019

Position and Speed Estimation Algorithm for Permanent Magnet Synchronous Machines Considering Nonlinear Magnetic Effects
Brodatzki, M.; Richter, J.; Kolb, J.; Braun, M.
2019. Green world with power electronics : 10th International Conference on Power Electronics - ECCE Asia, May 27-30, 2019, BEXCO, Busan, Korea, 724–731, Institute of Electrical and Electronics Engineers (IEEE)

Decoupled circulating- and output-current control of parallel inverter systems
Brodatzki, M.; Kammerer, F.; Braun, M.
2016. 42nd Annual Conference of the Industrial Electronics Society, Florence, I, October 24- 27, 2016, 3311–3316, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON.2016.7794010