Johannes Stoß, M.Sc.

Wissenschaftlicher Mitarbeiter
Leistungselektronik für mobile Anwendungen
Group:
Regelung in der Leistungselektronik & Antriebstechnik
Room: 015
CS 11.10
Phone: +49 721 608-41647
Fax: +49 721 358854
johannes stoss ∂does-not-exist.kit edu
MS Teams-Chat
ORCID

Google Scholar: Link

Johannes Stoß received his B.Sc. and M.Sc. degrees in electrical engineering from the Karlsruhe Institute of Technology (KIT) in 2015 and 2018, respectively. Since 2018, he has been a Research Associate at the Elektrotechnisches Institut (ETI) at KIT. His work involves design of test benches for up to 350 kW. He also focuses on parameter identification for PMSM, IM, and EESM as well as model predictive control algorithms.

Lehrveranstaltungen
title	type	semester	place
Vorlesung 738//Workshop "Schaltungstechnik in der Leistungselektronik"	internship	Sommersemester	kl. HS ETI, Labor im Zwischengeschoss des ETI
Praktikum Hard- und Software in leistungselektronischen Systemen	internship	Wintersemester	Seminarraum (Raum 016), Labor 110.5 (Raum 110.5)

Abschlussarbeiten
Titel	Typ	Betreuer	Bearbeiter
DIPLOMARBEIT
Entwicklung und Analyse eines neuen Konzepts für eine Regelung in α/β-Koordinaten für ein Active Front End mit SiC MOSFETs	Masterarbeit	M.Sc. Johannes Stoß M.Sc. Stefan Mersche
Entwicklung einer winkelabhängigen Vermessung für fremderregte Synchronmaschinen	Masterarbeit	M.Sc. Johannes Stoß M.Sc. Benjamin Bachowsky
Entwicklung, Aufbau und Inbetriebnahme eines neuen SiC- Kompaktstromrichters und Design der zugehörigen Netz- und EMV-Filter für den AFE-Betrieb	Masterarbeit	M.Sc. Johannes Stoß M.Sc. Michael Hetzel	11/2021
Entwicklung einer hochintegrierten modularen Umrichterplattform mit SiC-MOSFETs	Masterarbeit	M.Sc. Johannes Stoß	21.10.2019
DIPLOMARBEIT	Bachelorarbeit	M.Sc. Johannes Stoß M.Sc.Fabian Sommer	Ab Sofort
Entwicklung eines Drehmomentbeobachters im FPGA auf Basis eines Maschinenmodells	BA/MA	M.Sc. Johannes Stoß M.Sc. Benedikt Schmitz-Rode	Anfang April
Inbetriebnahme eines modularen Prüfstands zur Vermessung von Traktionsantrieben für die Elektromobilität	BA/MA	M.Sc. Johannes Stoß	ab April
Regelung und Inbetriebnahme eines Active Front End (AFE) im FPGA	BA/MA	M.Sc. Johannes Stoß	ab April 2020
Entwicklung eines online Verlustbeobachters zur genauen Drehmomentschätzung	Masterarbeit	M.Sc. Johannes Stoß	offen
Entwicklung einer winkelabhängigen Vermessung und Modellierung von Asynchronmaschinen	Masterarbeit	M.Sc. Johannes Stoß M.Sc. Benjamin Bachowsky	offen
Entwicklung einer einheitlichen modelbasierten Trajektorienregelung für dreiphasige Synchron-Maschinen	Masterarbeit	M.Sc. Simon Decker M.Sc. Johannes Stoß	offen
Auslegung, Entwurf und Inbetriebnahme eines Kleinspannungs-Kompaktumrichtersystems	Bachelor-/Masterarbeit	Stoß, Johannes Menger, Nikolas	sofort
Erfassung und Modellierung von Drehmomentharmonischen auf Basis neuartiger Messmethoden	BA/MA	M.Sc. Johannes Stoß M.Sc. Benedikt Schmitz-Rode	tbd
Entwicklung, Aufbau und Inbetriebnahme eines Prüfstands zur hochfrequenten Drehmomentmessung	Bachelor-/Masterarbeit	M.Sc. Johannes Stoß M.Sc. Benedikt Schmitz-Rode	tbd
Entwicklung und Validierung eines dynamischen PSM Maschinenmodells unter Berücksichtigung hochfrequenter Verlustanteile	Masterarbeit	M.Sc. Johannes Stoß M.Sc. Benedict Schmitz-Rode	tbd
Vermessung und Modellierung eines frequenzabhängigen Maschinenmodells für PMSM	BA/MA	M.Sc. Johannes Stoß M.Sc. Benedikt Schmitz-Rode	tbd

Veröffentlichungen

Combining Locked Rotor and Steady State Tests for EESM Flux Linkage Identification
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2024. 2024 IEEE 9th Southern Power Electronics Conference (SPEC), Brisbane, 2nd-5th December 2024, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC62217.2024.10893237

A Novel Highly Dynamic Torque Control Scheme for Electrically Excited Synchronous Machines
Geier, L.; Goehner, S.; Stoss, J.; Liske, A.; Hiller, M.
2024. 9th IEEE Southern Power Electronics Conference (SPEC 2024), 7 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC62217.2024.10893126

Analysis of Time Optimal Control Strategies for Electrically Excited Synchronous Machines Using Dynamic Optimization
Geier, L.; Stoß, J.; Liske, A.; Hiller, M.
2024. 2024 IEEE Energy Conversion Congress and Exposition (ECCE), 6321–6328, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE55643.2024.10861329

Tutorial: Methods to Identify & Control Highly Non-Linear Three-Phase Machines
Liske, A.; Geier, L. A.; Oerder, A.; Schmitz-Rode, B.; Stoß, J.
2024, October 20. IEEE Energy Conversion Congress and Exposition (ECCE 2024), Phoenix, AZ, USA, October 20–24, 2024

2D Repetitive PI Control for Enhanced Harmonic Current Suppression in Induction Machines
Stoß, J.; Mader, P.; Goehner, S.; Geier, L.; Brodatzki, M.; Hiller, M.; Liske, A.
2024. 2024 IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, 20th-24th October 2024, 5918–5924a, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE55643.2024.10860776

Gradient Based Hysteresis Current Control – A Parameter-Free Current Control Method for Highly Utilized PMSM Drives
Bachowsky, B.; Stoß, J.; Brodbeck, M.; Liske, A.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), 2056 – 2063, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567511

Efficient nonlinear modelling of spatial flux harmonics of squirrel cage induction motors using inverse flux maps and static FEA
Stoss, J.; Mader, P.; Geier, L.; Karayel, A.; Liske, A.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, 17th -20th May 2024, 1182–1189, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567693

Identification of Rotor Position and Current Dependent Flux Linkage Maps for EESMs
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, 17th - 20th May 2024, 1996–2003, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567840

New Current Control Strategy for EESMs Based on the Magnetic Equivalent Circuit with Dynamic Decoupling of the d- and e-Axis
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2023. 2023 IEEE 8th Southern Power Electronics Conference (SPEC), 8 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC56436.2023.10408003

Generalized Inversion of n-dimensional Flux Maps for Unified Nonlinear Machine Models and Predictive Control Algorithms
Geier, L.; Stoß, J.; Liske, A.; Hiller, M.
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, USA, 29 October 2023 - 02 November 2023, 4821–4828, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE53617.2023.10362422

Unified predictive flux control for EESM, IM, PMSM and SyRM
Stoß, J.; Geier, L.; Karayel, A.; Decker, S.; Liske, A.; Hiller, M.
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, 29th October - 2nd November 2023, 5009–5019, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ecce53617.2023.10362028

Identification of rotor and stator flux linkage maps of squirrel cage induction motors based on identification of rotor time constant maps
Stoß, J.; Karayel, A.; Geier, L.; Liske, A.; Hiller, M.
2023. 25th European Conference on Power Electronics and Applications (EPE’23 ECCE Europe), 11 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EPE23ECCEEurope58414.2023.10264589

Development of a Bearing Test Bench to Investigate Root Causes of Bearing Current Damages
Scheuermann, S.; Doppelbauer, M.; Hagemann, B.; Jarosz, A.; Kett, J.; Stoß, J.
2023. 2023 IEEE International Electric Machines & Drives Conference (IEMDC), 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/iemdc55163.2023.10238932

Angle-dependent identification of PMSM HF-parameters with large bandwidth based on switching harmonics of a 2-level inverter
Stoß, J.; Schmitz-Rode, B.; Steimel, P.; Aouadi, H.; Liske, A.; Hiller, M.
2022. IEEE 7th Southern Power Electronics Conference (SPEC), 05-08th December, 2022, Fiji, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC55080.2022.10058360

Hybrid torque sensing concept for high frequency and dynamic torque ripple measurements for brushless dc motors
Stoß, J.; Schmitz-Rode, B.; Niklaus, L.; Liske, A.; Hiller, M.
2022. 2022 IEEE Energy Conversion Congress and Exposition (ECCE), Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE50734.2022.9947796

Design guideline for PCB integrated, high bandwidth, current slope sensing based on a planar Rogowski coil
Stoß, J.; Wurster, C.; Menger, N.; Brodatzki, M.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)

Design of an Intelligent, Modular IGBT/SiC Inverter Platform up to 400 kW for Fast Realization of New Test-Bench Concepts
Stoß, J.; Frank, S.; Menger, N.; Sommer, F.; Gast, M.; Decker, S.; Liske, A.; Hiller, M.
2021. PCIM Europe digital days 2021 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Proceedings, 3 - 7 May 2021, 1670–1677, VDE Verlag

Online Parameter Identification of Permanent Magnet Synchronous Machines with Nonlinear Magnetics based on the Inverter Induced Current Slopes and the dq-System Equations
Decker, S.; Stoss, J.; Liske, A.; Brodatzki, M.; Kolb, J.; Braun, M.
2019. Proceedings 2019 European Conference on Power Electronics and Applications (EPE’19 ECCE Europe), Genova, Italy, 2019, P.1-P.10. doi:10.23919/EPE.2019.8915019