Veröffentlichungen

A Modular Rapid Prototyping Test Bench Platform for Accelerated Electric Drive Research
Goehner, S.; Oerder, A.; Zeller, T.; Stoss, J.; Bachowsky, B.; Parche, M.; Geier, L.; Bremer, M.; Digel, C.; Schmitz-Rode, B.; Hoffmann, F.; Doppelbauer, M.; Hiller, M.; Brodatzki, M.; Liske, A.
2025. PCIM Conference 2025 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management 6 – 8 Mai 2025, Nürnberg, 971–980, VDE Verlag. doi:10.30420/566541123

Recursive Moving Lean Instant Slope Constant Estimator for Online Measurement of Derivative and Absolute Value of Oversampled Signals
Bachowsky, B.; Schmitz-Rode, B.; Sattler, J.; Hiller, M.; Liske, A.
2024. 2024 IEEE 9th Southern Power Electronics Conference (SPEC), Brisbane, 2nd-5th December 2024, 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC62217.2024.10892936

Implementation of highly non-linear, flux-based, unified machine models on a rapid prototyping Controller-Hardware-in-the-Loop system
Schmitz-Rode, B.; Geier, L.; Stefanski, L.; Knierim, S.; Liske, A.; Hiller, M.
2024. IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, USA, 20-24 October 2024, 5682–5689, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE55643.2024.10861455

Tutorial: Methods to Identify & Control Highly Non-Linear Three-Phase Machines
Liske, A.; Geier, L. A.; Oerder, A.; Schmitz-Rode, B.; Stoß, J.
2024, Oktober 20. IEEE Energy Conversion Congress and Exposition (ECCE 2024), Phoenix, AZ, USA, 20.–24. Oktober 2024

Comparison of Quasi-Two-Level Operation of a Flying Capacitor Converter with Quasi-Two-Level Operation of a Modular Multilevel Converter
Mersche, S. C.; Katzenburg, N.; Kiehnle, P.; Schmitz-Rode, B.; Schulz, D.; Hiller, M.
2022. 2022 IEEE 7th Southern Power Electronics Conference (SPEC), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC55080.2022.10058325

Hybrid torque sensing concept for high frequency and dynamic torque ripple measurements for brushless dc motors
Stoß, J.; Schmitz-Rode, B.; Niklaus, L.; Liske, A.; Hiller, M.
2022. 2022 IEEE Energy Conversion Congress and Exposition (ECCE), Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE50734.2022.9947796

Validation of a slot-based High-Frequency Model of a Hairpin Winding Stator in Time-Domain
Scheuermann, S.; Doppelbauer, M.; Hagemann, B.; Jarosz, A.; Schmitz-Rode, B.
2022. 2022 International Conference on Electrical Machines (ICEM), Valencia, Spain, 05-08 September 2022, 1648–1654, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM51905.2022.9910882

Power Hardware-in-the-Loop Test Bench for Permanent Magnet Synchronous Machines based on a Parallel Hybrid Converter
Stefanski, L.; Schmitz-Rode, B.; Schwendemann, R.; Weis, N.; Liske, A.; Hiller, M.
2022, Juni 22. 23rd Workshop on Control and Modeling for Power Electronics (COMPEL 2022), Tel Aviv, Israel, 20.–23. Juni 2022

Hardware-in-the-Loop Setup for a Modular Multilevel Converter with Integrated Batteries
Leister, L.; Kalk, A.; Schmitz-Rode, B.; Stefanski, L.; Bräckle, D.; Hiller, M.
2022, Juni 22. 23rd Workshop on Control and Modeling for Power Electronics (COMPEL 2022), Tel Aviv, Israel, 20.–23. Juni 2022

Power Hardware-in-the-Loop Test Bench for Permanent Magnet Synchronous Machines based on a Parallel Hybrid Converter
Stefanski, L.; Schmitz-Rode, B.; Schwendemann, R.; Weis, N.; Liske, A.; Hiller, M.
2022. 2022 IEEE 23rd Workshop on Control and Modeling for Power Electronics (COMPEL): 20–23 June 2022, Tel Aviv, Israel, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COMPEL53829.2022.9829995

Hardware-in-the-Loop Setup for a Modular Multilevel Converter with Integrated Batteries
Leister, L.; Kalk, A.; Schmitz-Rode, B.; Stefanski, L.; Brackle, D.; Hiller, M.
2022. 2022 IEEE 23rd Workshop on Control and Modeling for Power Electronics (COMPEL), Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COMPEL53829.2022.9830034

A modular signal processing platform for grid and motor control, HIL and PHIL applications
Schmitz-Rode, B.; Stefanski, L.; Schwendemann, R.; Decker, S.; Mersche, S.; Kiehnle, P.; Himmelmann, P.; Liske, A.; Hiller, M.
2022. 2022 International Power Electronics Conference (IPEC-Himeji 2022- ECCE Asia), 1817–1824, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/IPEC-Himeji2022-ECCE53331.2022.9807061

Angle-dependent identification of PMSM HF-parameters with large bandwidth based on switching harmonics of a 2-level inverter
Stoß, J.; Schmitz-Rode, B.; Steimel, P.; Aouadi, H.; Liske, A.; Hiller, M.
2022. IEEE 7th Southern Power Electronics Conference (SPEC), 05-08th December, 2022, Fiji, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC55080.2022.10058360

A novel high dynamic six phase 120 kW Power Hardware in the Loop Emulation Test Bench for emulating AC/DC Grids and Electrical Machines
Stefanski, L.; Schwendemann, R.; Bernet, D.; Braeckle, D.; Schmitz-Rode, B.; Liske, A.; Hiller, M.
2021, September 6. 23rd European Conference on Power Electronics and Applications (EPE`23 ECCE Europe 2021), Online, 6.–10. September 2021

A novel high dynamic six phase 120 kW Power Hardware in the Loop Emulation Test Bench for emulating AC/DC Grids and Electrical Machines
Stefanski, L.; Schwendemann, R.; Bernet, D.; Braeckle, D.; Schmitz-Rode, B.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe), Ghent, Belgium, 6-10 Sept. 2021, P.1-P.10, Institute of Electrical and Electronics Engineers (IEEE)

Predictive Trajectory Control with Online MTPA Calculation and Minimization of the Inner Torque Ripple for Permanent-Magnet Synchronous Machines
Decker, S.; Brodatzki, M.; Bachowsky, B.; Schmitz-Rode, B.; Liske, A.; Braun, M.; Hiller, M.
2020. Energies, 13 (20), Article: 5327. doi:10.3390/en13205327