*

Dr.-Ing. Simon Decker

  • Karlsruher Institut für Technologie (KIT)
    Elektrotechnisches Institut (ETI)

    KIT Campus Süd
    Engelbert-Arnold-Str. 5
    Geb. 11.10, Raum 015
    D-76131 Karlsruhe

Studentische Arbeiten
Bild Titel Bearbeiter Betreuer Datum

Benjamin Bachowsky abgeschlossen 09/2020

elektrische Antriebe 01/2022

Qian Li abgeschlossen 04/2017

Patrick Roll abgeschlossen 06/2016

Florian Trudel abgeschlossen 07/2016

Matthias Westermann abgeschlossen 12/2019

Christian Hofmann abgeschlossen 04/2016

Daniel Schweiker abgeschlossen 04/2017

Pedelec und Pedelec-Prüfstand abgeschlossen 03/2021

Willy Steve Abissi Konga abgeschlossen 12/2016

Michael Schmitt abgeschlossen 01/2018

Robert Nowak abgeschlossen 05/2017
Oliver Ernst abgeschlossen 05/2019

Sascha Lutz abgeschlossen 05/2016

Benedikt Schmitz-Rode abgeschlossen 06/2019

Johannes Stoß abgeschlossen 07/2018

Stefan Abele abgeschlossen 05/2018

Kai Rickert abgeschlossen 01/2018

Jakob Gantenbein abgeschlossen 01/2019

Erik Seidenspinner abgeschlossen 04/2017

Felix Rehm abgeschlossen 03/2018

Veröffentlichungen

  1. S. Decker, J. Richter und M. Braun; "Predictive Current Control and Online Parameter Identification of Interior Permanent Magnet Synchronous Machines"; EPE'16 ECCE Europe, Karlsruhe, GER; Aug. 2016
    [PDF from Publisher] [PDF from KITopen]
  2. S. Decker, A. Liske, D. Schweiker, J. Kolb, M. Braun; "Measurement of Two-Level Inverter Induced Current Slopes at High Switching Frequencies for Control and Identification Algorithms of Electrical Machines"; IPEC'18 ECCE Asia, Niigata, JPN; May. 2018
    [PDF from Publisher] [PDF from KITopen]
  3. R. Schwendemann, S. Decker, M. Hiller, M. Braun; "A Modular Converter- and Signal-Processing-Platform for Academic Research in the Field of Power Electronics"; IPEC'18 ECCE Asia, Niigata, JPN; May. 2018
    [PDF from Publisher] [PDF from KITopen]
  4. S. Decker, J. Stoss, A. Liske, M. Brodatzki, J. Kolb und M. Braun; "Online Parameter Identification of Permanent Magnet Synchronous Machines with Nonlinear Magnetics based on the Inverter Induced Current Slopes and the dq-System Equations"; EPE'19 ECCE Europe, Genova, IT; Sept. 2019
    [PDF from Publisher] [PDF from KITopen]
  5. M. Schmitt, S. Decker und M. Doppelbauer; "Measuring and characterization of pedal electric bicycles (Pedelecs) on a full system test-bench with full range emulation of a cyclist"; EPE'19 ECCE Europe, Genova, IT; Sept. 2019
    [PDF from Publisher] [PDF from KITopen]
  6. A. Liske, S. Decker und M. Braun; "Resource optimal FPGA implementation of a Least-Squares-Estimator for fast and robust online measurement of current slope and absolute value"; EPE'19 ECCE Europe, Genova, IT; Sept. 2019
    [PDF from Publisher] [PDF from KITopen]
  7. F. Rehm, P. Breining, S. Decker, J. Kolb, M. Hiller; "Loss Comparison of Small Delta- and Star-Connected Permanent Magnet Synchronous Machines"; 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019), Lisboa, PRT; Oct. 2019
    [PDF from Publisher] [PDF from KITopen] 
  8. S. Decker, C. Rollbühler, F. Rehm, M. Brodatzki, A. Oerder, A. Liske, J. Kolb, M. Braun; "Dq0-modelling and parametrization approaches for small delta connected permanent magnet synchronous machines"; 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), Nottingham (virtual conference), GB; Dec. 2020
    [PDF from Publisher]
  9. S. Decker, S. Foitzik, F. Rehm, M. Brodatzki, C. Rollbühler, J. Kolb, M. Braun; "DQ0 Modelling and Parameterization of small Delta connected PM Synchronous Machines"; 24th International Conference on Electrical Machines (ICEM2020), Göteborg (virtual conference), SWE; Aug. 2020
    [PDF from Publisher]
  10. S. Decker, M. Brodatzki, B. Bachowsky, B. Schmitz-Rode, A. Liske, M. Hiller, M. Braun; " Predictive trajectory control with online MTPA calculation and minimization of the inner torque ripple for Permanent-Magnet Synchronous Machines "; Energies 13, no. 20: 5327
    [PDF from Publisher] [PDF from KITopen]
  11. J. Stoß, S. Frank, N. Menger, F. Sommer, S. Decker, M. Hiller; "Design of an intelligent, modular IGBT/SiC inverter platform up to 400 kW for fast realization of new test-bench concepts"; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2021), Nürnberg, GER
    [PDF from Publisher]
  12. S. Decker, C. Rollbühler, M. Brodatzki, F. Rehm, A. Liske, M. Hiller; "Comparison of Losses in Small Star- and Delta-Connected Permanent Magnet Synchronous Machines"; EPE'21 ECCE Europe, Ghent, BE; Sept. 2021
    [PDF from Publisher]
  13. M. Schmitt, S. Decker, L. Leister, A. Liske, M. Doppelbauer; "Measuring and Characterization of a Pedal Electric Cycle (Pedelec) Drivetrain on a Test-Bench for Modelling and Optimization"; VPPC'21 The IEEE Vehicular Power and Propulsion 2021, Gijon, ESP; Oct. 2021
    [PDF from Publisher]
  14. S. Decker; "Modellbildung und Parameteridentifikation von permanentmagneterregten Synchronmaschinen kleiner Leistung in Dreieckschaltung"; Dissertation, KITopen (2021)
    [PDF from KITopen]
  15. B. Schmitz-Rode, L. Stefanski, R. Schwendemann, S. Decker, S. Mersche, P. Kiehnle, P. Himmelmann, A. Liske, M. Hiller; "A modular signal processing platform for grid and motor control, HIL and PHIL applications"; IPEC'22 ECCE Asia, Himeji, JPN; May. 2022 - akzeptiert

Tagungsbeiträge

  1. S. Decker, J. Richter und M. Braun; "Predictive Current Control and Online Parameter Identification of Interior Permanent Magnet Synchronous Machines"; EPE'16 ECCE Europe, Karlsruhe, GER; Presentation, 05.09. - 09.09.2016
  2. S. Decker, A. Liske, D. Schweiker, J. Kolb, M. Braun; "Measurement of Two-Level Inverter Induced Current Slopes at High Switching Frequencies for Control and Identification Algorithms of Electrical Machines"; IPEC'18 ECCE Asia, Niigata, JPN; Poster, 20.05. - 24.05.2018
  3. R. Schwendemann, S. Decker, M. Hiller, M. Braun; "A Modular Converter- and Signal-Processing-Platform for Academic Research in the Field of Power Electronics"; IPEC'18 ECCE Asia, Niigata, JPN; Poster, 20.05. - 24.05.2018
  4. S. Decker, J. Stoss, A. Liske, M. Brodatzki, J. Kolb und M. Braun; "Online Parameter Identification of Permanent Magnet Synchronous Machines with Nonlinear Magnetics based on the Inverter Induced Current Slopes and the dq-System Equations"; EPE'19 ECCE Europe, Genua, ITA; Poster, 02.09. - 06.09.2016
  5. M. Schmitt, S. Decker und M. Doppelbauer; "Measuring and characterization of pedal electric bicycles (Pedelecs) on a full system test-bench with full range emulation of a cyclist"; EPE'19 ECCE Europe, Genua, ITA; Poster, 02.09. - 06.09.2016
  6. A. Liske, S. Decker und nd M. Braun; "Resource optimal FPGA implementation of a Least-Squares-Estimator for fast and robust online measurement of current slope and absolute value"; EPE'19 ECCE Europe, Genua, ITA; Poster, 02.09. - 06.09.2016
  7. F. Rehm, P. Breining, S. Decker, J. Kolb, M. Hiller; "Loss Comparison of Small Delta- and Star-Connected Permanent Magnet Synchronous Machines"; 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019), Lisboa, PRT; Presentation, 14.10. - 17.10.2019
  8. A. Liske, S. Decker; "Messung der taktfrequenten Stromsteigungen in Stromrichterschaltungen" ECPE-Cluster-Seminar "Echtzeitanalyse und Leistungsmessung von elektrischen Maschinen und Stromrichtern"; Aschaffenburg, GER; Presentation, 12.03.2020
  9. S. Decker, S. Foitzik, F. Rehm, M. Brodatzki, C. Rollbühler, J. Kolb, M. Braun; "DQ0 Modelling and Parameterization of small Delta connected PM Synchronous Machines"; 24th International Conference on Electrical Machines (ICEM2020), Göteborg, SWE; Presentation (virtual conference), 23.08. - 26.08.2020
  10. S. Decker, C. Rollbühler, F. Rehm, M. Brodatzki, A. Oerder, A. Liske, J. Kolb, M. Braun; "Dq0-modelling and parametrization approaches for small delta connected permanent magnet synchronous machines"; 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), Nottingham, GB; Presentation (virtual conference), 14.12. - 16.12.2020
  11. J. Stoß, S. Frank, N. Menger, F. Sommer, S. Decker, M. Hiller; "Design of an intelligent, modular IGBT/SiC inverter platform up to 400 kW for fast realization of new test-bench concepts"; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2021), Nürnberg, GER, Presentation (virtual conference), 03.05. - 07.05.2021
  12. S. Decker, C. Rollbühler, M. Brodatzki, F. Rehm, A. Liske, M. Hiller; "Comparison of Losses in Small Star- and Delta-Connected Permanent Magnet Synchronous Machines"; EPE'21 ECCE Europe, Ghent, BE; Poster (virtual conference), 06.09. - 10.09.2021
  13. M. Schmitt, S. Decker, L. Leister, A. Liske, M. Doppelbauer; "Measuring and Characterization of a Pedal Electric Cycle (Pedelec) Drivetrain on a Test-Bench for Modelling and Optimization"; VPPC'21 The IEEE Vehicular Power and Propulsion 2021, Gijon, ESP; Presentation (virtual conference), 25.10-14.11.2021